If your beer cooler isn't cooling, you can adjust it using the following steps:
1. Check the thermostat setting
Thermostat setting adjustment: The setting on the thermostat determines the beer cooler's temperature. Generally, setting 1 is the highest temperature, and setting 7 is the lowest. Adjust the setting according to the season. In spring and autumn, it should be set to a middle setting (around setting 3); in summer, a lower setting (between 1 and 2); and in winter, a higher setting (around setting 4 and 5).
2. Consider the ambient temperature
The effect of ambient temperature on beer coolers: Both excessively high and low ambient temperatures will affect the cooling effect of the beer cooler. Therefore, when adjusting the beer cooler temperature, you need to consider the ambient temperature and make appropriate adjustments.
3. Check the refrigerant and thermostat system
Refrigerant leak: If the beer cooler keeps cooling without stopping, it may be due to a refrigerant leak. In this case, you need to have it inspected and repaired by a professional.
Thermostat system malfunction: A malfunction in the thermostat system can also cause the beer cooler temperature to be unadjustable. This also requires inspection and repair by a professional.
4. Recommended Beer Storage Temperature
Suitable Storage Temperature: The recommended storage temperature for beer is between 5°C and 25°C. Temperatures that are too low may worsen the beer's taste, while temperatures that are too high may accelerate spoilage.
Avoid Direct Freezing: Beer should not be placed directly into the freezer for rapid cooling. When refrigerating, the temperature should not be too low to avoid affecting the beer's taste.
